Tired of people asking how he came up with his brilliant designs, Frank Lloyd Wright once famously explained,
“Why, I just shake the buildings out of my sleeve.”
Wright liked to say he just
shook designs out of his sleeve.
It was mostly Wright’s puckish sense of humor talking when he claimed to conjure fully-formed concepts out of thin air. Yet today there’s still a widespread misperception that architects design by invoking some kind of arcane creative voodoo, and that ideas just flow onto the paper without effort.
Alas, there’s a lot more hard work than magic involved in designing a building. This is a great advantage to non-architects, though you might not realize it. It means that if you’re methodical and willing to carry out what is often a tedious process, you, too, could shake a decent design out of your sleeve.
Suppose, for example, that you want to build an addition onto your house. Long before you ever put pencil to paper or finger to iPad, here’s what you need to do:
• Come up with what architects call the “program”--basically, a wish list for your project. As a minimum, it should describe what kind of rooms and spaces you want to add, roughly how many square feet each will require, and which rooms will have to adjoin each other. The program can also include more abstract requirements, from general atmosphere (sunny, restful, dramatic, or whatever) or any other qualities you have in mind. In general, the more complete your program, the smoother your design process will be.
A survey such as this one
will show where your
property lines are—and they
may surprise you.
• Obtain a survey from a licensed civil engineer or surveyor showing where your home sits on your property, as well as major artificial and natural features such as outbuildings, utilities, rock outcroppings, sloping land, large trees, drainage swales, and so on. It should also show any rights-of-way, reserves, or easements that could prevent you from building on the land.
• Add up the total square footage of the addition as dictated by your program and, if it seems that there’s enough room on your property to accommodate it, proceed to the next step (if not, downsize your plans accordingly). Armed with your survey, set up an appointment with a planner at your local building department to discuss your proposed addition. Begin by requesting the property setbacks--the minimum distance you must keep structures from the front, side, and rear property lines. Next, ask for the maximum allowable building height in your neighborhood.
Your local planning department
will tell you your zoning,
which in turn will tell you
where you can build,
and where you can't.
As obvious as these steps may seem, they’re commonly overlooked by do-it-yourself designers, who typically rush directly into drawing detailed plans only to find out that their ideas don’t comply with one or more of these restrictions. Far from being an antagonist, a good planner will be a great help early on, pointing out such potential booby traps, and perhaps even suggesting alternatives that’ll help you circumvent them.
What you’ll take away from this meeting are the following crucial bits of information: How many square feet of addition you can build, where and how high you can build them, and whether or not you need to notify your neighbors in order to do so. Next time, we’ll use that information to begin--finally--designing your addition.